AZA Builders
New custom home in Arlington VA with a deep covered front porch that qualifies for the lot coverage bonus, landscaped front lawn, and narrow driveway
Owner's Guides

Arlington County Lot Coverage Calculation: How Big Can Your New House Be? (2027)

By Sam Azhar — Principal & Class A Project Director | November 17, 2026 | 12 min read

Here is a fun Arlington party trick: ask three neighbors how big a new house can be on their lot, and you will get four answers and one argument. The real answer comes down to one formula, and once you understand the Arlington County lot coverage calculation, you will know your buildable house size faster than your architect can say "let me check the ordinance."

This guide walks you through it like a friend with a calculator and a building permit habit. We will cover the exact lot coverage and main building footprint limits for every single-family district, the front porch bonus, what counts and what does not, the LDA permit that kicks in at 2,500 square feet of disturbance, and what may change in 2027. Grab a coffee and your plat.

Quick answer: The Arlington County lot coverage calculation divides everything that covers your lot (house, garage, sheds, driveway, pool, pergola) by your total lot area. In R-6, a one-family home can cover up to 40% of the lot, rising to 43% with a qualifying front porch, 45% with a detached rear garage, and 48% with both. Separately, the main building footprint is capped at the lesser of 30% of the lot or 2,520 square feet (33% or 2,772 square feet with a front porch). Most new homes disturb more than 2,500 square feet of ground, which triggers an Arlington LDA permit.

How the Arlington County Lot Coverage Calculation Works

Arlington uses two separate limits on every single-family lot, and you have to pass both. Think of it as a two-question pop quiz where failing either one means redesign.

  1. Lot coverage: the total area of everything that covers the ground (buildings, driveways, and certain features) divided by your gross lot area.
  2. Main building footprint coverage: the footprint of the house itself, limited by both a percentage of the lot and a hard square foot cap.

The formula is simple: lot coverage (%) = total covered area ÷ gross lot area × 100. The hard part is knowing what goes in the "covered area" bucket. The county has been regulating lot coverage since 1942, and the current single-family limits date to a 2005 amendment designed to stop oversized homes from swallowing their lots.

What Counts Toward Lot Coverage in Arlington

Counts toward lot coverageDoes not count toward lot coverage
Main house resting on the groundAir conditioners and compressors (even on pads)
Detached garages and accessory buildings like shedsSidewalks and walkways
Paved driveways and parking padsAreaways to basement doors
In-ground swimming poolsPlay equipment and swing sets
PergolasPicnic tables, benches, and outdoor furniture
Bay windowsGround-level patios (per the county's current guidance)

Translation for your lawn care and landscaping plans: your walkway, your patio, and your kids' playset are safe. Your dream pool, your pergola, and that extra-wide driveway are not free. Every square foot of them comes out of the same budget as your house.

Aerial view of an Arlington VA block showing houses, driveways, patios, and lawns that count toward lot coverage, with one new home foundation under construction

Arlington Lot Coverage and Footprint Limits by District (2027)

Here is the full table every Arlington homeowner should tape to the fridge. These are the one-family dwelling limits from Arlington County Zoning Ordinance §3.2.5.A.

LimitR-5R-6R-8R-10R-20
Maximum lot coverage45%40%35%32%25%
With front porch (60+ sq ft)48%43%38%35%28%
With detached garage in rear yard50%45%40%37%30%
With front porch and rear detached garage53%48%43%40%33%
Main building footprint (%)34%30%25%25%16%
Main building footprint with front porch (%)37%33%28%28%19%
Main building footprint cap (sq ft)2,3802,5202,8003,5004,480
Footprint cap with front porch (sq ft)2,5902,7723,1363,9205,320

R2-7 lots generally follow the R-6 column, and R-10T follows R-10. Not sure which district you are in? Arlington's online property search shows your zoning, or we can pull it for you in about five minutes.

Arlington Main Building Footprint Coverage in R-6, Explained

This is the rule that trips people up the most. Your main building footprint is limited to whichever is smaller: the percentage of your lot, or the square foot cap. On a standard 6,000 square foot R-6 lot, 30% equals 1,800 square feet, which is far below the 2,520 square foot cap. So your real footprint limit is 1,800 square feet, or 1,980 square feet with a qualifying front porch.

The cap only starts to matter on bigger lots. Here is the lot size where the square foot cap takes over in each district:

DistrictFootprint %Cap kicks in at lot size of aboutExample footprint on a standard lot
R-534%7,000 sq ft1,700 sq ft on 5,000 sq ft
R-630%8,400 sq ft1,800 sq ft on 6,000 sq ft
R-825%11,200 sq ft2,000 sq ft on 8,000 sq ft
R-1025%14,000 sq ft2,500 sq ft on 10,000 sq ft
R-2016%28,000 sq ft3,200 sq ft on 20,000 sq ft

Own an undersized lot, like a 5,000 square foot lot in R-6? The county calculates your maximum main building footprint as if you had a standard size lot for the district. Total lot coverage, however, gets no such relief. The county has said plainly that it never intended to give undersized lots a break on total coverage.

The Front Porch Lot Coverage Bonus: Free Square Footage With Curb Appeal

Arlington actually rewards you for building a front porch. A qualifying porch adds 3 percentage points to both your lot coverage limit and your main building footprint limit. In R-6, that is 180 extra square feet of footprint on a standard lot. Not bad for a place to drink lemonade and judge the neighbors' lawn care.

The county created the bonus in 2005 to encourage inviting streetscapes instead of tall, flat facades. A 2017 Zoning Administrator advice memo spells out exactly what qualifies:

  1. It must meet the zoning definition of a porch: an unenclosed platform with columns or piers supporting a roof.
  2. It must be at least 60 square feet.
  3. Those 60 square feet cannot have enclosed floor space above them.
  4. Wrap-around or side portions do not count toward the 60 square feet.
  5. It must be attached to the side of the house that faces the front lot line.

Two gotchas we see constantly. First, "unenclosed" means the sides cannot be more than 40% covered by anything other than screening, so a glassed-in porch loses the bonus. Second, on a corner lot, the front lot line is the shortest street-facing line, so make sure your porch faces the right street. Want porch inspiration? See our guide to the best porch types for Northern Virginia homes.

Worked Example: How Big Can Your New House Be on a 6,000 Square Foot R-6 Lot?

Let us run the numbers on the most common Arlington lot: 60 feet wide, 100 feet deep, zoned R-6, with a front porch and an attached garage.

  • Lot area: 6,000 square feet
  • Maximum lot coverage with porch: 43% = 2,580 square feet
  • Maximum main building footprint with porch: 33% = 1,980 square feet (below the 2,772 cap, so the percentage controls)
  • Driveway: a 10 by 50 foot driveway uses 500 square feet
  • Remaining coverage: 2,580 minus 1,980 minus 500 leaves about 100 square feet for a shed or pergola

With a 35-foot height limit, that 1,980 square foot footprint typically supports two full stories plus a finished basement, so you are looking at roughly 4,000 square feet above grade and close to 6,000 square feet of finished space with the lower level. That is a lot of house on a modest lot, which is exactly why Arlington teardowns keep happening.

Want a pool? Here is where it gets interesting. A detached garage in the rear yard bumps your coverage to 48%, but a 15 by 30 pool plus decking can eat 600+ square feet fast. Smart site planning decides whether you get the pool, the garage, or both. Our outdoor living team designs the backyard alongside the house so the math works on day one.

Setbacks and Height: The Other Limits on Your Arlington House Size

Lot coverage is only one fence around your house. The building envelope is also shaped by setbacks and height:

  • Height: one-family homes in Arlington's R districts are generally limited to 35 feet.
  • Typical R-6 setbacks: about 25 feet in front (with a block-average option in some cases), side yards around 10 feet with one side often reducible to 8 feet, and about 25 feet in the rear. Always confirm your exact numbers on a certified plat.
  • Allowed projections: eaves can project 4 feet into a setback, chimneys and bay windows without floor space can project 18 inches, and covered but unenclosed porches can encroach into the front setback only.

Our infill home construction cost guide for Arlington shows how setbacks shrink a typical lot into a buildable box, and what that box costs to build.

Surveyor total station and flagged property corner stake on a residential lot used to confirm Arlington setbacks and lot coverage

Arlington LDA Permit: What Happens at 2,500 Square Feet

Here is the permit that surprises almost every first-time Arlington builder. If your project disturbs 2,500 square feet or more of ground, you need a Land Disturbing Activity and Stormwater Management (LDA/SWM) permit under Arlington's Chapter 60 and the Virginia erosion and sediment control program.

Disturbed areaWhat Arlington requires
Under 2,000 sq ftNo LDA/SWM permit
2,000 to 2,499 sq ftSurvey of the disturbed area, LDA acknowledgement form, and county-approved silt fence or perimeter control
2,500 sq ft or moreFull LDA/SWM permit with stormwater management

How to Estimate Your Disturbed Area for an Arlington LDA Permit

Disturbed area is bigger than your footprint. The county adds a work zone around everything you build:

  • 10 feet around a new structure, an addition, or any part being demolished or getting a new story
  • 5 feet around new driveways, sidewalks, and ground-level decks
  • 5 feet centered on new utility lines
  • A construction access path, plus areas for dumpsters, stockpiles, and staging

Do the math on our R-6 example: a 44 by 45 foot house becomes 64 by 65 feet with the 10-foot work zone. That is about 4,160 square feet of disturbance before you even count the driveway. The county's own rule of thumb: if your new footprint is 1,000 square feet or more, you will usually exceed 2,500 square feet. So yes, a new house in Arlington almost always needs an LDA permit. Separate projects within two years are added together, so you cannot dodge it by phasing.

What the Arlington LDA Permit Requires

  • A stormwater management plan meeting state quantity and quality standards
  • Soil de-compaction after construction
  • Runoff that is not concentrated toward downhill neighbors
  • Review of off-lot impacts from retaining walls and fill
  • As-built documentation for grading and trees (not required on the Streamlined option)

Moderate-scale single-family projects may qualify for Arlington's Streamlined LDA/SWM 2.0 path, in effect since September 2021, which simplifies some requirements. A design-build team that knows which path fits your project can save you weeks. See our building permit guide for how Arlington reviews compare to Fairfax and Loudoun.

New home foundation in Arlington VA with silt fence, tree protection fencing around a mature oak, and a gravel construction entrance required under an LDA permit

What Could Change in 2027: Arlington's Impervious Area Study

Here is the 2027 headline most cost guides have not caught yet. Arlington's Low Residential Study is working toward a maximum impervious area requirement for residential lots. That could eventually count things that lot coverage ignores today, like patios and walkways. The county's published timeline calls for drafting zoning language this winter, community review in winter and spring 2027, and public hearings in spring or summer 2027.

What that means for you: if you are planning a new home or a big hardscape project, designing under today's rules and submitting before any amendment takes effect may give you more flexibility. If you own a lot and are on the fence, 2027 is a good year to get your plans moving. Thinking about multiple units instead? Our guide to Arlington Missing Middle (EHO) covers duplex and townhouse coverage rules.

Five Ways to Max Out Your Arlington Lot Legally

  • Add a qualifying front porch. It is the easiest 3% you will ever earn.
  • Move the garage to the backyard. A detached rear garage adds 5% to your total lot coverage limit.
  • Go down, not out. Basements do not count toward lot coverage, so a finished lower level adds space without touching your footprint.
  • Shrink the driveway. Every square foot of pavement you skip is a square foot you can give to the house, a pergola, or a pool.
  • Choose patios over pergolas where it counts. Ground-level patios do not count toward coverage today, so they are a smart way to expand outdoor living.

Already have a house you like? A second-story addition vs a bump-out comparison can show whether building up beats building out on a coverage-limited lot. The county confirms you can add a story straight up on a home that already exceeds coverage, as long as you meet height and setbacks.

How AZA Builders Helps You Build the Biggest House Your Arlington Lot Allows

We start every Arlington project with the dirt, not the floor plan. That means a certified plat, a lot coverage and footprint calculation, setback and height checks, and an LDA disturbance estimate before design begins. Then we design a custom home or home addition that uses every legal square foot. Run your parcel through our lot feasibility scorecard, explore our North Arlington work, or compare options with our teardown vs renovate calculator.

Want to see Arlington builds from foundation to front porch? Watch our project walkthroughs on YouTube and quick jobsite tips on Instagram.

Arlington County Lot Coverage Calculation FAQs

How do you calculate lot coverage in Arlington County?

Add up the area of your house, detached garage, sheds and other accessory buildings, paved driveways and parking pads, in-ground pool, pergolas, and bay windows. Divide that total by your gross lot area and multiply by 100. Compare the result to your district's maximum, including any porch or rear garage bonus.

What is the maximum main building footprint in R-6?

The lesser of 30% of your lot or 2,520 square feet, or 33% or 2,772 square feet with a qualifying front porch. On a standard 6,000 square foot R-6 lot, that is 1,800 square feet, or 1,980 with a porch.

How does the front porch lot coverage bonus work in Arlington?

A roofed, unenclosed porch of at least 60 square feet attached to the front of the house adds 3 percentage points to both lot coverage and main building footprint limits. Wrap-around portions and areas under enclosed space do not count toward the 60 square feet.

Do driveways count toward lot coverage in Arlington?

Yes. Paved driveways and parking pads count. Sidewalks, walkways, air conditioners, and play equipment do not.

When do I need an LDA permit in Arlington?

When your project disturbs 2,500 square feet or more of land, including work zones around the structure. Projects disturbing 2,000 to 2,499 square feet need a survey and county-approved silt fence. A new house almost always crosses the 2,500 square foot threshold.

Can I add a second story if my house already exceeds lot coverage?

Generally yes. Arlington allows a second-story addition directly on top of a home that exceeds current coverage limits, as long as it meets height and setback requirements.

Ready to Find Out How Big Your Arlington House Can Be?

Here is the bottom line. The Arlington County lot coverage calculation is not complicated, but it is unforgiving. Miss one driveway, one pergola, or one porch detail and you are back at the drawing board while your carrying costs tick away. Get it right on paper first and your new home, your backyard, and your budget all fit.

Send us your address. We will pull your zoning, calculate your lot coverage and footprint limits, estimate your LDA disturbance, and show you the biggest house your lot can legally hold. Book your free consultation or call (571) 393-2722 today. No guesswork, no zoning jargon, just your numbers.

Have a quick question first? Message us on Facebook or catch our 60-second zoning tips on TikTok. Your lot has more potential than you think.

This guide is general information based on the Arlington County Zoning Ordinance and county guidance as of November 2026. Always confirm your specific limits with Arlington County Zoning before you design or buy.

Share This Article
S
Written By

Sam Azhar, Principal & Class A Project Director

Sam has directed the structural engineering and Design-Build execution of custom estates and major renovations across McLean, Great Falls, and Northern Virginia's most exacting jurisdictions, with a Class A license and a record of on-time, on-budget delivery.

Continue Reading

Further Engineering Intelligence.